Publicidad
Idiomas disponibles
Idiomas disponibles
Dtect200C_2610067510_06-21.qxp_D-tect200 6/14/21 9:30 AM Page 7
The definitions below describe the level of severity for each signal word.
!
Read all instructions. Failure
to
listed below may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS
The
detect objects is affected by
the proximity of other equipment that produce
strong magnetic or electromagnetic fields, and
by moisture, metallic building materials, foil-
laminated
insulation
conductive wallpaper.
The
detector's
substructures (studs) is also affected by
inconsistency on the thickness of the surface
material, such as plaster and lath.
It is possible that there may be metal, wood or
wiring or something else, such as plastic pipes,
beneath the scanned surface that is not
detected.
The
should not be relied on
exclusively to locate items below the scanned
surface. Use other information sources to help
locate items before penetrating the surface.
Such additional sources include construction
plans, visible points of entry of pipes and wiring
into walls, such as in a basement, and standard
16" and 24" stud spacing practices.
Before penetrating a surface
(such as with a drill, router,
saw or nail), always shut off the electrical power,
gas and water supplies. Cutting, drilling, etc...
Safety Symbols
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
General Safety Rules
follow
all
instructions
detector's
ability
materials
and/or
ability
to
detect
wood
detection
tool
alone
into these items when operational can result in
personal injury.
ensure 100 % certainty. To rule out hazards,
safeguard yourself each time before drilling,
to
sawing or routing in walls, ceilings or floors by
means of other information sources, such as
building plans, pictures from the construction
phase, etc. Environmental influences, such as
humidity or closeness to electrical devices, can
influence the accuracy of the detection tool.
Surface quality and condition of the walls (e. g.,
moisture, metallic building materials, conductive
wallpaper, insulation materials, tiles) as well as
the amount, type, size and position of the
objects can lead to faulty measuring results.
Never swallow button cells. Swallowing button
cells can result in severe internal burns and
death within two hours.
Ensure that the button cell is kept out of the
reach of children. If you suspect that someone
has swallowed a button cell or that a button cell
has entered the body in another way, seek
medical attention immediately.
Ensure that battery replacement is carried out
properly. There is a risk of explosion.
Do not attempt to recharge the button cell and
do not short circuit the button cell. The button
cell may leak, explode, catch fire and cause
personal injury.
Remove and dispose of drained button cells
correctly. Drained button cells may leak and
damage the product or cause personal injury.
-7-
For technological reasons,
the detection tool cannot
Publicidad
