Units Installation; Installation Space - Hitachi HNE Serie Manual De Instalación Y Funcionamiento

UNITS INSTALLATION

10. UNITS INSTALLATION
10.1. OUTDOOR UNITS INSTALLATION

CAUTION:
Transport the products as close to the installation location as practical before unpacking.
-
Do not put any material on the products.
-
- Apply four lifting wires on to the outdoor, when lifting It by crane

WARNING:
Install the outdoor unit with sufficient clearance around it for operation and maintenance as shown in the next figures.
-
Install the outdoor unit where good ventilation is available.
-
- Do not install the outdoor unit where is a high level of oil mist, salty air or sulphurous atmosphere.
Install the outdoor unit as far as practical (being at least 3 meters) from electromagnetic wave radiator (such as medical
-
equipment).
Keep clearance between the units of more than 50 mm, and avoid obstacles that may hamper air intake, when installing more
-
than one units together.
Install the outdoor unit in the shade or not exposed to direct sunshine or direct radiation from high temperature heat source.
-

CAUTION:
Check to ensure that the foundation is flat, level and sufficiently strong.
-
Install the unit in a restricted area not accessible by the general public.
-
Aluminum fins have very sharp edges. Pay attention to the fins to avoid injury.
-

10.1.1. INSTALLATION SPACE

a) In case that suspending in the ceiling
All manuals and user guides at all-guides.com
b) In case that installing on the floor
PMGB0126A rev.2 - 11/2006
12