Assembly - Makita EB5300TH Manual De Instrucciones

ASSEMBLY

CAUTION:
CAUTION:
CAUTION:
and tighten them with the hose band.
2
Swivel pipe
Loosen and remove the clamp screw.
Clamp screw
For tube throttle model, be careful not to twist the
cable on the control handle when attaching to
the swivel pipe.
Install the control handle / handle assembly
onto the swivel pipe and tighten them with the
clamp screw.
3
1
Flexible pipe Hose band
Control handle / handle assembly
Clamp screw
hose band. Set the control cable onto the cable
holder, and close the cable holder.
Elbow
1
Cable holder
elbow with the hose band.
Attach the long/short pipe to the swivel pipe. Turn
the long/short pipe clockwise to lock it into place. Then
attach the blower nozzle with the long/short pipe. Turn
the blower nozzle clockwise to lock it into place.
10 ENGLISH
1
Insert the elbow to the
1
3
Cable holder Hose band
1
Control cable
Insert the elbow to the
2
2
2