Before Starting The Engine - Makita EB5300TH Manual De Instrucciones

1
Long/short pipe
Make sure all clamps are tight. Check if the
trottle valve moves correctly along with the throt-
tle movement.
If the throttle cannot be fully pulled or the throttle
does not return to the correct position, refer to
the MAINTENANCE section for throttle valve
adjustment.
2
Blower nozzle
BEFORE STARTING THE
ENGINE
CAUTION:
NOTICE:
NOTICE:
Otherwise, any sand or dust adhering to
the oil cap may cause irregular oil circulation
or wear on the engine parts, which will result in
troubles.
Upper limit mark
oil cap.
Make sure that the oil level is within the upper
and lower limit marks. If the oil is not up to the
Change the oil whenever it becomes dirty or
engine oil" for the oil change procedure and
frequency.)
11 ENGLISH
Otherwise skin burn may result.
Lower limit mark
1
2