Operation; Control Element; Buttons; Display Symbols - Webasto Cool Top 110 RT-C Instrucciones De Instalación Y Funcionamiento

3

Operation

3.1

Control element

A/C
Fig. 01: Display
3.2

Buttons

A/C Manual cooling ON or OFF
Start A/C in Auto mode
Recirculated air mode ON / OFF
Up
■ Increase values
Down
■ Decrease values
On/Off
■ Switches the A/C system ON / OFF
3.3

Display symbols

Symbol Description
Cooling ON and compressor OFF
Cooling and compressor ON
A/C running in automatic mode
Ventilation runs in automatic speed control
A
Ventilation runs in manual speed control
M
Fresh air closed
Fresh air opened
°C / °F
Celsius / Fahrenheit
SP Set-point
Warning
!
Cool Top
°C
SP
M
3.4

Switch system ON

Screen in OFF mode
3
Press "On/Off" button
– The compressor and the fan will
start up.
3.5

Switch system OFF

During a short vehicle stoppage, e.g. during loading / unloading,
you do not need to switch the system off using the control ele-
ment. The system will start up automatically the next time you
start the engine.
Screen in ON mode
3
Press "On/Off" button
3.6

Temperature set during operation

System is switched ON
3
Press button "Auto mode" to switch
X
between temperature setting and
Fan speed regulation.
Press button "Up" to increase the
X
temperature value
Press button "Down" to decrease the
X
temperature value
The temperature value is stored in the control element.
The temperature range is limited between 18°C and 28°C
The display shows:
■ "Lo" when temperature is set lower than 18°C
– The A/C system runs at maximum cooling capacity
■ "Hi" when temperature is set higher than 28°C
– The A/C runs at maximum heating capacity (Only if heating kit
is installed)
3.7

Ventilation speed regulation

Press button "Auto mode" to switch
X
between temperature setting and
ventilation speed regulation.*
Press button "Up" to increase the
X
ventilation speed
Press button "Down" to decrease the
X
ventilation speed
* Ventilation in manual mode: The ventilation speed is fixed.
* Ventilation in auto mode: The ventilation speed depends on the
difference between temperature setting and the actual measured
temperature.
A/C
°C
SP
A
A/C
°C
SP
A
A/C
°C
SP
A
A/C
°C
SP
A
A/C
°C
SP
M
4