Important Safety Precautions - Varan NEPPJ-04 Manual De Instrucciones

IMPORTANT SAFETY PRECAUTIONS


Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.

This equipment should be operated by professional personnel only.

Keep hands and body clear of all pinch points.

This equipment is designed for use only with body/frame equipment and attachments. Use with any other equipment may
result in overloading, reduced load capacity, reduced stability and/or system failure.

Do not overload. Overloading is often indicated by bowing extension tubes or slipping attachments and can result in personnel
injury and/or damage to the equipment.

Maintain proper oil level. Overfilling may cause damage to or failure of this equipment.

When offset attachments are used, the rated capacity is always reduced by 50%. For each additional extension tube used in
the setup, the overall capacity is reduced by 50%. Refer to "Load Capacities" at the back of the manual for typical setups and
corresponding load capacities.

Do not connect the pump to any ram that is fully or partially extended.

Prior to applying a load, please ensure that all attachments and extension tubes are fully engaged.

Ensure that the load is centrally applied to the attachments and ram saddle to minimize an off-centre load condition.

Use a force gauge to verify the actual load being applied for various types of setups.

Frequently inspect this repair kit carefully for any damages or missing parts.

Keep the work area clean. Keep the device away from children and unauthorized users.
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
NEPPJ-04
T: 00352/26908036 – F: 00352/26908040