Flicker Settings; System Message - AIPTEK POCKET DV M1 Guia Del Usuario

All manuals and user guides at all-guides.com

Flicker Settings

Country England
Setting 50Hz
Country
Portugal
Setting 50Hz
Note: The flicker setting is based on the frequency standard of your local power supply.

System Message

Message
Recording
Please Unlock SD Card
No File
Please Change Battery
Memory Full
Card Error
Memory Error
Strobe Is Charging
File Format Error
Deleting
Formatting
Setting
Appendix:A
Germany France
50Hz 50Hz
America Taiwan
60Hz 60Hz
The camcorder is recording a file.
If you insert a SD card and the card is set to "Protected", this message
will show up when the camcorder tries to write data into the card.
When the camcorder is set to Playback mode without any existing file to
play, this message will show up.
The battery life of the camcorder is low. You should replace or recharge
the battery immediately.
The storage memory is full and can not store any more files. Please
change the SD/MMC card or delete some files to free some memory
space.
The inserted card is not compatible with the camcorder. Please change
the card or try formatting the card.
The camcorder can not access data in the internal memory.
Please format the medium to solve this problem.
The flash strobe is charging.
The file being played is not compatible with the camcorder.
The camcorder is performing file deletion.
The camcorder is formatting the storage medium.
The camcorder is performing a setting action.
48
Italy Spain
50Hz 50Hz
China Japan
50Hz 50/60Hz
Description
Netherlands
50Hz
Korea
60Hz