in-lite SCOPE BASE PLATE Manual De Instrucciones página 8

EN
Contents
1x SCOPE BASE PLATE
1x template
4x screws
2x screw caps
Material
Aluminium
Please read the following instructions before installing. You are
advised to keep these installation instructions in a safe place.
Although a 12 V system is safe, we advise you to have a qualified
electrician check the installation.
Use
Base plate for installing SCOPE fixture to hard surfaces (wood, stone,
plastic etc).
All manuals and user guides at all-guides.com
Important!
Never connect the low-voltage cable directly to a 100-240 V power
source. It is only suitable for use in combination with a 12 V low-voltage
system. This product should only be used within the in-lite system. Use
of products other than those made by in-lite will invalidate the warranty.
Enjoy the lighting in your yard.