Publicidad
Idiomas disponibles
Idiomas disponibles
4
Assembling the cover.
8
10
b
h
• Remove the double-sided tape separation
paper from the hinge cover
it with wood bolting screw
• Loosely fasten the front cover (left)
hinge bolting screw
• Move the front cover (left)
right and attach the front cover (left)
the cabinet.
• Fasten the front cover (left)
cabinet with the wood bolting screw
places).
• Fasten with the hinge bolting screw
• Insert the deco cover (left)
cover (left)
.
8
5
Prepare to insert the power plug into
the socket. If the power plug cannot be
inserted into the socket after installation
of the product, insert the power plug
into the socket. In this case, turn off the
refrigerator by pressing the power button on
a display for at least three seconds until the
installation is completed.
CAUTION
• Do not bend the power cable excessively or
place a heavy object on top of it.
12
b
7
and tighten
7
firmly.
b
with
8
(2 places).
h
to the left or
8
on
8
on the
8
(2
b
.
h
on the front
10
6
Insert the appliance into the cabinet so that
the end of the hinge stand
the front surface of the cabinet.
The top view of the appliance
The top view of the appliance
For a cabinet with a thickness of 20 mm,
keep an 11 mm gap between the hinge and
the cabinet.
CAUTION
• Be careful when inserting the appliance into
the cabinet, as it may cause injury.
• Hang the power cord on the hook at the back
of the appliance before pushing the appliance
in the cabinet. Failure to do so may cause
damage to the power cord.
7
Adjust verticality and horizontality by turning
the adjusting feet of the appliance.
When the Appliance Leans
Backward.
• Adjust by turning the adjusting feet
counterclockwise.
When the Appliance Leans Forward.
• Adjust by turning the adjusting leg
clockwise.
EN
corresponds to
3
3
Hinge stand
Hinge stand
Hinge
Hinge
Publicidad
