Publicidad
SET UP & USE continued:
CAMERA SCAN (additional camera purchase required)
To scan all available cameras (at 8 second intervals), press Camera (K), highlight scan (use up/down arrows to navigate (G)), then
Select (H). To stop scanning, press Home (E).
TALK BACK
To speak to your baby, press the Talk Back button (B) on top of the parent unit, while speaking into the microphone (M) on the front.
TEMPERATURE
The temperature of the baby's room (in deg C) is displayed in the top right of the screen.
NIGHTLIGHT
To activate the nightlight, press the nightlight icon in the top right of the screen. Press icon again to switch off.
Testing Your Initial Setup:
Be sure to test your Monitor's reception before initial use.
We also recommend testing your Monitor's reception periodically. Please keep in mind that the Baby Touch™ Digital Colour Video
Monitor will not provide the same level of picture quality as your television with cable, satellite dish, or digital service.
To test reception you will need two adults. One adult should view the picture on the Monitor while the other is in the nursery to
adjust the Camera. Often the quality of the reception can be improved by slightly repositioning the Camera, Monitor, or both. It may
help to place a stuffed animal or doll in the crib to simulate the position and size of your baby. Adjust the picture quality on the
Monitor as needed by using the Brightness Adjustment on the front of the Monitor.
To test sound quality, have one adult speak in both a normal tone and a whisper near the crib. Adjust volume on the Monitor's
Volume Adjustment as needed.
To Use the Video Monitor in Portable Mode:
For use in portable mode, the Monitor requires 1 3.7V LITHIUM-ION battery (included).
Tips:
• Before using Monitor in portable mode (battery), be sure to charge battery 12-16 hours.
• To charge battery, plug the larger AC Adapter into the Monitor's AC Adapter port. Plug the other end into a standard electrical outlet.
• After initial 12-16 hour charge, to achieve optimal battery life, charge battery overnight and unplug all day during use.
Note: Only charge battery when low indicator light comes on. Constant recharging of your battery before low battery indicator
light comes on will decrease the life of your batteries.
• When battery is low, the Power On LED will illuminate amber, indicating that the battery needs to be recharged.
• If battery is exhausted, remove immediately from the Monitor.
• Properly dispose of exhausted battery.
CHARGING MONITOR
The Monitor can also be charged using the Monitor Recharge Base.
Step 1: Plug AC Adapter into AC Adapter Port on back of Monitor Recharge Base. Then plug the AC Adapter into a standard electrical outlet.
Step 2: Place Monitor into recharge base. (Note: You will hear an audible click to signify the Monitor is properly engaged.)
If Monitor is already on: Battery Power Indicator will flash until unit is fully charged.
If Monitor is in "Off" mode: A large battery charging icon will appear for 30 seconds signifying battery is charging. The screen
will go black after 30 seconds.
Battery Installation:
Note: This step is only needed if replacing battery.
1. Locate the battery compartment door on back of monitor.
2. Slide open battery door and insert battery. Ensure correct connection. Slide battery door back in place.
Cordless Camera Battery Pack:
Set Up & Use:
1. Locate the battery compartment door on bottom of camera battery pack (Figure A).
2. Use Phillips Head Screwdriver to remove battery door.
3. Insert 4 'AA' batteries (not included). Ensure correct connection.
4. Place battery door back and screw closed.
5. Place camera on top of battery pack. Twist camera clockwise until the arrow from the camera are
aligned with the "lock" arrow on battery pack (Figure B).
6. Turn camera to "ON" position.
Note: Camera battery pack will supply portable power for up to 10 hours. Rechargeable batteries
are recommended (not included).
7. To remove camera from battery pack, twist camera counterclockwise until the arrow from the
camera are aligned with the "UNLOCK" arrow on the battery pack.
All manuals and user guides at all-guides.com
A
B
(
(
)
Select (H
.
G
.
.
(
Select (H
.
.
LED
(
.
Camera (K
.
) I (
.
Code
.
28326
Code Button
Publicidad
