Basic Operations; Recording A Video Clip - AIPTEK AHD-H12 Manual De Instrucciones

Basic Operations

Recording a video clip

1. Adjust the focus:
Normally the camcorder can auto focus
without adjusting focus. If you want to take
close-up pictures, you can use the Joystick to
move up to switch to Macro mode (
2. Adjust the zoom:
Move the Zoom button left or right to
zoom in or zoom out the screen.
As you zoom in all the way, the zoom
bar may get stuck on the bar line.
You can push Zoom-in (T) button
again to enter digital zoom.
The camcorder has a built-in 120X Zoom (12X optical zoom
and 10X digital zoom), allowing you to capture great quality
images, even at a distance.
3. Press the Record button to start recording.
4. Press the Record button again to stop recording.
5. While recording, press the
recording, and press the
resume recording.
6. Picture in Video (PIV)
During recording, you can capture images by pressing the Joystick switch. The image
you captured will appear the same resolution as the one you set for still picture.
7. Electronic Image Stabilization (E.I.S.) / Gyroscopic Video Stabilization (G.V.S.)
The camcorder has built-in electronic stabilizer to eliminate blurring from hand shake.
Downloaded From VideoCamera-Manual.com Manuals
All manuals and user guides at all-guides.com
).
button to pause
button again to
Macro mode
switch
Zoom (in/out) button
Digital zoom
Optical zoom
Record button
OK key/
Joystick 5-way
5 5