Chicago Pneumatic CP 0016 Manual De Instrucciones página 9

CP 0016, 4130, 4131, 4132, 4134
Never 'ride' on the machine with one leg over
►
the handle.
Never strike or abuse the equipment.
►
Check regularly for wear on the working tool,
►
and check whether there are any signs of
damage or visible cracks.
Pay attention and look at what you are doing.
►
WARNING Dust and fume hazard
Dusts and/or fumes generated or dispersed when
using the machine may cause serious and
permanent respiratory disease, illness, or other
bodily injury (for example, silicosis or other
irreversible lung disease that can be fatal, cancer,
birth defects, and/or skin inflammation).
Some dusts and fumes created by drilling,
breaking, hammering, sawing, grinding and other
construction activities contain substances known to
the State of California and other authorities to
cause respiratory disease, cancer, birth defects, or
other reproductive harm. Some examples of such
substances are:
Crystalline silica, cement, and other masonry
•
products.
Arsenic and chromium from chemically-treated
•
rubber.
Lead from lead-based paints.
•
Dust and fumes in the air can be invisible to the
naked eye, so do not rely on eye sight to
determine if there is dust or fumes in the air.
To reduce the risk of exposure to dust and fumes,
do all of the following:
Perform site-specific risk assessment. The risk
►
assessment should include dust and fumes
created by the use of the machine and the
potential for disturbing existing dust.
Use proper engineering controls to minimize the
►
amount of dust and fumes in the air and to
minimize build-up on equipment, surfaces,
clothing, and body parts. Examples of controls
include: exhaust ventilation and dust collection
systems, water sprays, and wet drilling. Control
dusts and fumes at the source where possible.
Make sure that controls are properly installed,
maintained and correctly used.
Wear, maintain and correctly use respiratory
►
protection as instructed by your employer and
as required by occupational health and safety
regulations. The respiratory protection must be
effective for the type of substance at issue (and
if applicable, approved by relevant
governmental authority).
Work in a well ventilated area.
►
9800 0616 71 | Original instructions
All manuals and user guides at all-guides.com
Safety and operating instructions
If the machine has an exhaust, direct the
►
exhaust so as to reduce disturbance of dust in a
dust filled environment.
Operate and maintain the machine as
►
recommended in the operating and safety
instructions
Select, maintain and replace consumables/
►
working tools/ other accessories as
recommended in the operating and safety
instructions. Incorrect selection or lack of
maintenance of consumables/ inserted tools/
other accessories may cause an unnecessary
increase in dust or fumes.
Wear washable or disposable protective clothes
►
at the worksite, and shower and change into
clean clothes before leaving the worksite to
reduce exposure of dust and fumes to yourself,
other persons, cars, homes, and other areas.
Avoid eating, drinking, and using tobacco
►
products in areas where there is dust or fumes.
Wash your hands and face thoroughly as soon
►
as possible upon leaving the exposure area,
and always before eating, drinking, using
tobacco products, or making contact with other
persons.
Comply with all applicable laws and regulations,
►
including occupational health and safety
regulations.
Participate in air monitoring, medical
►
examination programs, and health and safety
training programs provided by your employer or
trade organizations and in accordance with
occupational health and safety regulations and
recommendations. Consult with physicians
experienced with relevant occupational
medicine.
Work with your employer and trade organization
►
to reduce dust and fume exposure at the
worksite and to reduce the risks. Effective
health and safety programs, policies and
procedures for protecting workers and others
against harmful exposure to dust and fumes
should be established and implemented based
on advice from health and safety experts.
Consult with experts.
Residues of hazardous substances on the
►
machine can be a risk. Before undertaking any
maintenance on the machine, clean it
thoroughly.
9