Important; Frequently Asked Questions; Need More Help; Storage Of Headset - Jabra BT 250 Manual Del Usuario

IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly
before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,
and you'll need to reattempt pairing (see steps 3–5 above).
Once you're done pairing, the following new headset features will be available:
•
Last number redial (when not on a call)
While the headset is on, press and hold
release immediately
•
Rejecting an incoming call (when not on a call)
When your phone rings, press and hold
release immediately
•
Call-waiting (swapping between 2 calls)
When your phone notifies you of another incoming call while you're on a call,
press and hold until you hear 2 short beeps, release immediately
•
Putting a call on hold
While you're on a call, press and hold
immediately. Repeat to retrieve the call
14

Frequently asked questions

1. How far away from my phone will my Jabra BT250 work?
The operating range is typically up to 33 feet (10 metres).
2. Will Jabra BT250 work with my cordless phone at home?
Jabra BT250 is not designed for use with cordless phones.
3. Will Jabra BT250 work with laptops, PCs, and PDAs?
Jabra BT250 will work with devices that are compliant with Bluetooth version 1.1 or
higher specifications and support the headset and/or hands-free profile(s).
4. Will anything cause interference with my conversation when I'm using my
Jabra BT250?
Appliances such as cordless phones and wireless networking equipment may
cause interference with your conversation, usually adding a crackling noise. To
reduce any interference, keep the headset away from other devices that use or
produce radio waves.
10
All manuals and user guides at all-guides.com
until you hear 2 short beeps,
until you hear 2 short beeps,
until you hear 2 short beeps, release
5. Will my Jabra BT250 interfere with my car's electronics, radio,
or computer?
Jabra BT250 produces significantly less power than a typical mobile phone. It also
only emits signals that are in compliance with the international Bluetooth standard.
Therefore, you should not expect any interference with standard consumer-grade
electronics equipment.
6. Can other Bluetooth phone users hear my conversation?
When you pair your headset to your Bluetooth phone, you are creating a private
link between only these two Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by third parties because Bluetooth
wireless signals are significantly lower in radio frequency power than those
produced by a typical mobile phone.
7. What material is the headset made of?
The MiniGel is made of PVC (polyvinyl chloride), a form of plastic. The headset itself
is primarily made of thermoplastic polyurethane, which is a soft plastic. The face
of the headset, where the buttons are located, is made of polycarbonate, a very
strong, hard plastic. Neither the MiniGel nor the headset contains latex.
8. How do I take care of Jabra BT250?
•
To clean the headset, use a clean, soft cloth that is slightly damp
•
To clean the MiniGel, remove it from the headset by gently lifting and pulling it
off the speaker housing. Then, wash it in warm, soapy water
15

Need more help?

1. Web: www.jabra.com/fscs (for the latest support info and online User Manuals).
2. E-mail and telephone support: See back inside cover for customer service support
telephone numbers and e-mail.
16

Storage of headset

1. Always store the Jabra BT250 with power off and safely protected.
2. Avoid storage at high temperatures (above 60°C / 134°F) – such as in a hot vehicle
or in direct sunlight. (Storage at high temperatures can degrade performance and
reduce battery life).
3. Do not expose the headset or any of its supplied parts to rain or other liquids.
11