LMP NexGen Keypad WKP-803 Manual Del Usuario página 15

When using the LMP NexGen Keypad with my iPad it does not work properly.
All manuals and user guides at all-guides.com
The LMP NexGen Keypad is specifically designed to work with desktop or portable Mac
computers. It does not support iPad which is clearly stated on the packaging. The iPad
allows only one keyboard/input device to be connected at a time. Thus if you connect
the LMP NexGen Keypad, the internal iPad keyboard is non-operational.
On the LMP NexGen Keypad, there is a „." (decimal) key. In my language, the „," is
used as the decimal sign. Will the LMP NexGen Keypad display a „." or a „,"?
Whether the LMP NexGen Keypad displays a (decimal) „." or a (decimal) „," depends on
the Mac OS installed (keyboard layout/language), i.e. in French OS/keyboard layout, the
decimal key displays a „," while in Swiss OS/keyboard layout, a „." is displayed. You may
change the default setting of the decimal sign here: „System Preferences" –> „language"
–> „Text" –> „Region". Go to „Numbers" and select „Configure". A table will be shown
where you can set the decimal sign to „." or „,". Note that this will only apply to certain
programs such as MS Excel (while in MS Word it will be using the OS default).
During the pairing process with the Mac, there is a window displayed called
„Keyboard identification". I am supposed to press the key next to the shift key.
But there is no shift key on the LMP NexGen Keypad. What do I need to do?
The message can be ignored. Simply press the red button in the upper left corner to
close this win-dow. Your Mac will recognize the LMP NexGen Keypad.
The connection to my Mac is lost from time to time or lost completely. The
Bluetooth Keypad does not seem to be connected anymore to my Mac. This
happened after I updated the OS.
An update of the OS can lead to a damaged Bluetooth thread as well as other reasons
such inter-ferences from other electronic devices or system crashes. Follow these steps
to renew the Bluetooth connection:
1) Remove all entries of „Bluetooth Keypad" or „LMP Keypad" in the Bluetooth Assi-
stant's menu by selecting them and pressing the „-" button in the lower left corner.
2) Turn off the Mac and Bluetooth Keypad.
3) Start your Mac and turn it off again (after the OS has booted without any entries of
the LMP NexGen Keypad in its Bluetooth directory).
4) Start your Mac again and install the LMP NexGen Keypad from scratch. The connec-
tion should be re-established.
Where do I find technical and warranty information?
Please refer to the last pages of the manual.