Publicidad
Idiomas disponibles
Idiomas disponibles
english
Scan
This feature allows you to monitor all the channels automati-
cally for valid signals. Your dealer can program more than
16 channels on the scan list.
Scan operation
By pressing a side button in which the scan function is
programmed, you can operate the scan function.
1. Press the scan button to begin scanning.
scan button to begin scanning.
scan button
2. Press the scan button one more time to stop scanning.
scan button
scan button one more time to stop scanning.
Note :
The LED flashes green color while scanning.
Talkback
With the talkback function being activated, if your radio has
scanned a channel on which there is a party with whom you
want to talk, you can directly communicate with the party by
pressing and holding down the PTT Button.
Deleting a Nuisance Channel
When the radio has scanned a channel which you don't want
to hear, you can temporarily remove the channel from the
scan list by using the nuisance channel delete feature.
If the radio is locked onto a unwanted channel, press the
nuisance delete button until you hear beep two times.
nuisance delete button until you hear beep two times.
nuisance delete
Note :
If the priority function is programmed by your dealer, you
cannot remove the priority channel from the scan list. The last
channel also cannot be deleted from the scan list.
Note :
To bring a deleted nuisance channel back into the scan list, you
must reset the radio.
All manuals and user guides at all-guides.com
11
12 of 52
Publicidad
