Publicidad
Idiomas disponibles
Idiomas disponibles
TV 200
1 Connect the power adapter to the DC IN input socket located on the trans-
mitter rear panel and connect the power adapter to an electrical outlet.
2 Connect the transmitter with the audio source using the audio cable pro-
vided. If necessary, use one of the audio cable adapters.
3 Slide the power-on switch on the rear side of the transmitter to the posi-
tion ON. The power indicator LED will light green.
Set up the receiver
The receiver comes with a built-in rechargeable battery.
Place the receiver into the charging cradle and make sure
the battery is fully charged before first use (charging LED
indicator lights red). This will take approx. 2 hours. If the
battery is fully charged, the charging LED indicator lights
green. A fully charged battery provides up to 9 hours of lis-
tening enjoyment.
1 Take the fully charged receiver from the cradle and switch it on (ON). The
power indicator LED will light green.
2 Switch on the audio source.
3 Flex the head set arms outwards until the ear buds can be inserted in the
ear. Please note the ear buds can be angled through a movement up,
down or sideways, so as to enter the ear a little deeper. This will improve
the sound quality and volume. Gently press the ear buds further into the
ear to find a comfortable position for the ear buds and an ideal position
for the sound.
Hearing damage due to high volumes!
This receiver allows you to set higher volumes than conventional head-
phones. This can cause hearing damage in persons with healthy hearing
and especially in children.
• Before putting the receiver on, set the volume on the receiver to a low
value.
• Do not continuously expose yourself to high volumes.
12
Publicidad
