Publicidad
Idiomas disponibles
Idiomas disponibles
6.2 QUICK CALIBRATION BY USERS
(not applicable for the initial calibration of replacement mainboard or sensor)
When starting up self-check 0~9 number, quickly enter the user's calibration password 9158.
WEIGHT
6.3 TROUBLE SOLVING
The following table shows the possible causes and solutions of common problems and failures. It is for reference only. If you still have any ques-
tions, please contact the authorized dealer.
Symptoms
CAN NOT TURN ON
INSTABILITY
[HOP NUMBER]
ACCURACY IS POOR
CAN'T CALIBRATE
THE BACKLIGHT DOESN'T WORK
ALARM IS INVALID
BATTERY SYMBOL FLICKER
BATTERY FAILURE
THE SCALE IS NOT FULL
-------
( )
0.0
AFTER LOADING THE CALIBRATION WEIGHTS ABOVE THE HALF-RANGE AND STABILIZING FOR 3 SECONDS,
THE AUTOMATIC CALIBRATION COMPLETES AND EXITS.
Possible Reasons
NO POWER CONNECTION, NO BATTERY
THE USE ENVIRONMENT IS UNSTABLE
IMPROPER CALIBRATION
UNSTABLE ENVIRONMENT
MODE OFF
MODE OFF
LOW BATTERY
BATTERY OUT OF SERVICE
THE ZERO OF THE SENSOR IS TOO HIGH
AND THE PRESET TARE IS TOO HEAVY
OVERLOAD
UNIT WEIGHT (
)
put
Check Solution For Reference
CHECK THAT THE POWER CONNECTION AND
BATTERY VOLTAGE ARE CORRECT
MOVE THE ELECTRONIC COUNTER TO THE
APPROPRIATE ENVIRONMENT
MOVE THE ELECTRONIC COUNTER TO THE
APPROPRIATE ENVIRONMENT
ENTER THE MENU SETTINGS ACTIVATION
ENTER THE MENU SETTINGS ACTIVATION
CHARGE AND REPLACE THE BATTERY IN
CONTACT THE COMPANY AUTHORIZED
REPLACE THE BATTERY
REPLACE THE SENSOR AND REMOVE THE
WEIGHT ON THE SCALE
REDUCE THE LOAD ON THE SCALE
BOC-P USER MANUAL
QUANTITY (
)
Au-cal
CALIBRATE
MODE
MODE
TIME
DEALER TO
PRESET TARE
EN
EN
17
Publicidad
