Description Of Symbols - GMC GKOMT250 Traducción Del Manual Original

Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe and effective
operation of this product. This product has unique features and, even if you are familiar with similar products,
it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of
the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
GB
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Conforms to relevant legislation and safety standards.
Toxic fumes or gases!
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice.
Original Instructions
Technical Abbreviations Key
V
~
A
n0
Hz
W, kW
/ min or min -1
Specification
Model number:
Input voltage:
Power:
No load speed:
Oscillating angle:
Protection class
Ingress protection:
Length of power cord:
Dimensions (L x W x H):
Weight
As part of our ongoing product development, specifications of GMC products may alter without notice.
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration a
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are
necessary.
4
Volts
Alternating current
Ampere
No load speed
Hertz
Watt, kilowatt
(revolutions or reciprocation) per minute
GKOMT
230-240V~ 50Hz
250W
10,000-23,000min
3.2°
IP20
2.5m
240 x 70 x 100mm
1.8kg
86dB(A)
97dB(A)
3dB
: 6.99m/s (sanding)
2
h
1.5m/s 2
-1