3
ECONO
SEND
TURBO
ON 1
AUTO
OFF 1
ON 2
CANCEL
OFF 2
8.
3
ECONO
SEND
TURBO
ON 1
AUTO
OFF 1
ON 2
CANCEL
OFF 2
9.
3
ECONO
SEND
TURBO
ON 1
AUTO
OFF 1
ON 2
CANCEL
OFF 2
10.
3
ECONO
SEND
TURBO
ON 1
AUTO
OFF 1
ON 2
CANCEL
OFF 2
11.
12.
man_Eleonora 74-2 S-line ('22) V1.indd 149
man_Eleonora 74-2 S-line ('22) V1.indd 149
ECONO
SEND
ACTIVATE AUTOMATIC MODE (ON1)
TURBO
Press button
ON 1
(1) to switch on the stove according to programme 1. The time
AUTO
ON 2
CANCEL
and ON1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired activation time is shown in the remote control. Press
The display (5) on the stove will show Chrono. See figures 10 and 11.
ECONO
SEND
DEACTIVATE AUTOMATIC MODE (OFF1)
TURBO
AUTO
Press button
ON 1
OFF 1
(1) to switch off the stove according to programme 1. The time
ON 2
CANCEL
OFF 2
and OFF1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired deactivation time is shown in the remote control. Press
firm. The display on the stove will show Chrono. This text will disappear when the
set switch-on time and switch-off time have elapsed. See figure 12.
PROGRAMME 2 (ON2 AND OFF2)
As above but use buttons
CANCELLING SET TIMER PROGRAMMES
Press the corresponding ON or OFF button of the programme you wish to cancel.
The hours and minutes and the corresponding symbol appears in the remote con-
trol display. Press the CANCEL (2) button to cancel the stove's automatic switch-on
and switch-off schedule. Press SEND (3) to confirm. See figure 13.
DAILY REPETITION
The AUTO mode allows the set switch-on and switch-off timer to be repeated every
day. To activate this mode, hold down the
(2) will appear on the remote control display. Press
on the stove will show Chrono. To deactivate this mode, hold down the
(1) for at least 2 seconds then press
Always clean the brazier before the stove starts up automatically. This
will prevent damage to the stove and the area around it.
4.9 REPLACING BATTERIES IN THE REMOTE CONTROL
If the remote control batteries need replacing, remove the battery holder cover
on the rear of the unit as shown in figure 15. Replace the old batteries with new
ones, making sure they are inserted the right way. Only use AAA 1.5V batteries.
Do not throw batteries into the fire as they could explode or release hazardous
substances. If you are replacing or destroying the remote control, remove the bat-
teries and dispose of them in accordance with current legislation as they can harm
the environment.
4.10 WIFI CONNECTION
The stove can be connected to an optional WiFi module. With this WiFi module,
the stove can be started or switched off. The timer of the stove can also be operat-
ed very easily and conveniently. In addition, the temperature can be read remotely.
For the connection of the special WiFi module for this stove, a connection plug is
provided at the back side of the unit. For more information, please contact your
local reseller.
OFF 1
OFF 2
ECONO
ECONO
SEND
SEND
TURBO
TURBO
ON 1
ON 1
AUTO
AUTO
OFF 1
OFF 1
(1) and
(2).
ON 2
ON 2
CANCEL
CANCEL
OFF 2
OFF 2
ECONO
SEND
TURBO
button (1) for at least 2 seconds.
AUTO
ON 1
OFF 1
ON 2
CANCEL
OFF 2
ECONO
TURBO
ON 1
(3). See figure 14.
ECONO
SEND
ON 2
TURBO
AUTO
ON 1
OFF 1
ON 2
CANCEL
OFF 2
ECONO
SEND
ECONO
SEND
and
TURBO
ECONO
SEND
TURBO
ON 1
AUTO
AUTO
ON 1
(1).
OFF 1
TURBO
ON 2
CANCEL
ON 2
CANCEL
OFF 2
AUTO
(4) to confirm.
ON 1
OFF 1
ECONO
SEND
ON 2
TURBO
CANCEL
OFF 2
AUTO
ON 1
OFF 1
ON 2
CANCEL
OFF 2
ECONO
SEND
ECONO
SEND
and
TURBO
ECONO
SEND
TURBO
ON 1
ON 1
AUTO
AUTO
(1).
OFF 1
OFF 1
TURBO
ON 2
CANCEL
OFF 2
ON 2
CANCEL
OFF 2
ON 1
AUTO
(4) to con-
OFF 1
ECONO
SEND
TURBO
ON 2
CANCEL
OFF 2
ON 1
AUTO
OFF 1
CANCEL
ON 2
OFF 2
ECONO
SEND
TURBO
AUTO
ON 1
ECONO
SEND
ON 2
CANCEL
(3) to confirm. The display
SEND
TURBO
button
ON 1
AUTO
OFF 1
AUTO
OFF 1
ON 2
CANCEL
OFF 2
CANCEL
OFF 2
4
149
OFF 1
OFF 2
OFF 1
OFF 2
03-05-2022 16:27
03-05-2022 16:27