Publicidad
Idiomas disponibles
Idiomas disponibles
Other function settings
1-Top red circle position of (figure 10) is to modify the device name and
device icon.
2- Bottom red rectangle position of (figure 10) is to modify infrared sensor
sensitivity.
3-Top red rectangle position position of (figure 11) is to set the battery power
storage ratio to determine the low battery alarm threshold.
4- Middle red rectangle position position of (figure 11) is to share this camera
with other members.
5- Bottom red rectangle position position of (figure 11) is to remove the device
binding.
9.
Note
1- This device is power supply by Li-battery, and the battery usage lifetime
will be affected by the wake-up time and number of wake-ups. The PIR function
is recommended to be turned off in a crowded environement, or set the low
sensitivity to reduce the number of wake-ups of the device and extent the
battery life. Please, charge it in time when the battery is low.
2- During the installation, please confirm whether the network situation
is good or the device is covered by WIFI network, especially for outdoor
installation. If the signal is weak, please use some device to improve the signal
of the WIFI network for installation.
3-This device is a low power consumption smart product that can be support
APP remote wake-up, PIR human body detection wake-up, and key press
wake-up. After each wake-up, it will automatically enter the dormant state after
working for a short period of time.
10
11
EN
21
Publicidad
