Publicidad
Idiomas disponibles
Idiomas disponibles
3. Using the numeric keypad, enter the identifier of the
message you wish to send. To enter different messages,
separate each message identifier using the enter key .
If the message identifier is unknown
a. Select the MSG: line of the display and press OK.
b. A list of the folders containing the available pre-
recorded messages appears. Use the / navigation
keys to select the desired folder and press OK.
c.
A list with the name of the messages and their
identifiers is displayed. Use the / navigation keys
to select the desired message and press OK
To delete use the DEL key.
4. If you want to send the message preceded by a GONG
tone, press the navigation key to select the
the display. Press OK key to turn the gong ON or gong
OFF.
5. Then press the PLAY key to start the message.
Next to the
icon, there is a digit showing the number of the
activated and playing messages. To view the detailed
information, select this line of the display and press OK. A list
will appear showing the message identifiers (MSG :), zones
identifiers (Z :) and groups identifiers (G :) of the messages
being activated and being played. To stop a message in
progress, select it using the navigation keys / and press
the DEL key.
12.9. Volume zones adjustment
(
To modify the volumes of music program or priority is required user level
Operator or Administrator. To modify the emergency volume requires
administrator user level
Using the / navigation keys, select the settings
1.
menu ( ).
Using the / keys select VOLUMES and press OK.
2.
Using the / keys select one zone and press OK.
3.
4.
Depending on the type of zone (UMX-2SA card zones,
UMX-2SB sub-zone or UMX-MC6 sub-zone), slightly
different menus appear:
a. UMX-2SA
1. Select MUS if you want to change the volume of
the music program for that zone.
Select PRI if you want to change the volume of
the the paging for that zone.
Select EMG if you want to change the volume of
the emergency paging for that zone.
2. Press OK.
3. Using the / keys to set the desired volume
between +4 and -80dB.
DC-800ETH version 4.3.001
DC-800ETH
line of
)
b.UMX-MC6 (Attention: The audio received by the
UMX-MC6 card comes from a UMX-2SA card.
Changing the volume of a UMX-MC6 sub-zone is
modifying the output volume of the UMX-2SA card, so
it will affect all sub-zones of the UMX-MC6 that
depend on that audio output)
1. Select MUS if you want to change the volume of
the music program
Select PRI if you want to change the volume
of the paging.
Select EMG if you want to change the volume of
the emergency emergency announcements.
2. Press OK.
3. The display shows the list of zones whose
volume is affected by the change. You can check
the list by using / keys. Press OK to
continue.
4. Using the / keys to set the desired volume
between +4 and -80dB.
c. UMX-S2B (Attention: Each sub-zone of a UMX-2SB
card has its own internal volume control for the music
program, allowing to set different musical program
volumes for each sub-zone. The other volumes affect
all sub-zones of the UMX-2SB.)
1. Select [MUS] ATTENUATOR if you want to
change the volume of a sub-zone's music
program.
2. Press OK.
3. Using the / keys to set the desired volume
between 0 (mute) and 5.
1'. Select MUS if you want to change the volume of
the music program. This change will affect all
sub-zones of the UMX-2SB card.
Select PRI if you want to change the volume of
the paging. This change will affect all sub-zones
of the UMX-2SB card
Select EMG if you want to change the volume of
the emergency announcements. This change
will affect all sub-zones of the UMX-2SB card.
2'. Press OK.
3'. The display shows the list of zones whose
volume is affected by the change. You can check
the list by using / keys. Press OK to
continue.
4'. Using the / keys to set the desired volume
between +4 and -80dB.
5.
Press OK to save.
R + D Department
IP Microphone desk
and Control central
18
Publicidad
