Hiltron security XR Serie Manual De Instrucciones página 3

security
Made in Italy
BT2014/35/UE
EMC2014/30/UE
CHARACTERISTICS
Dual-element shielded sensor with FRESNEL lens with 5 beams
!
Signalling through LEDs of radio transmittion and condition
!
discharged battery
High immunity to RF 30Vm
!
Detection test and radio transmission
!
Antiopening protection tamper
!
Sensitivity adjustable by trimmer
!
Power supply voltage battery 9V (included)
!
Consumption in st/by 10µA
!
Alarm transmission delay 5min
!
Beams of the lens 5
Coverage angle (PIR) H: 10°; V: 40°
!
Coverage max. 4mt
!
Threshold level for low-battery 7,6 Volt
!
Operating frequency 433,92MHz
!
Sensitivity adjustable by trimmer
!
Initial stabilizing time 60"
!
Dimensions (W)38mm
!
Dimensions (H)117mm
!
Dimensions (D)25mm
!
The XR8 is a passive infrared sensor with 5 beam Fresnel lens, it is particularly adapt for doors and
windows passage control.
Allows to protect the access in a ambient without prevent the regular movement inside it.
INSTALLATION
The device is installed by fitting the XR8 sensor in a manner that allows it to transmit radio signals to
the base unit without interference. You should therefore avoid locations with obstacles such as concrete
pillars or large metal structures, or any interference from radio sources on the same transmission
frequency. The fewer obstacles between the sensor and the base unit, the greater the range.
The sensor should be firmly attached to walls, ensuring the area is absolutely free from vibrations. Avoid
direct exposure to sunlight and keep the sensor away from heat sources such as radiators.
Lead free
Pb
RoHS
compliant
RECOMMENDED INSTALLATION
Detector tend infrared radio XR Series
XR8
3