Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
OPERATING THE DIMMABLE LED LIGHT
Turn on wall switch to turn light and defogger pad on.
NOTE: The defogger pad will only work when light is on. The defogger pad and light cannot be wired separately.
1. Touch the sensor button to turn ON the light.
2. Touch and hold the sensor button to dim the light. Release the button when the light reaches the desired brightness setting.
3. When the LED gets to the maximum or minimum brightness setting, it will stop. Release, then press and hold the button to go
in the opposite direction, where it will stop at the maximum or minimum brightness setting.
4. Touch the sensor button to turn OFF the light.
The mirrors are equipped with a memory feature to preserve the previous brightness setting, when turning the light back on
from either the sensor button or the wall switch.
CHANGING THE COLOR OF THE LED LIGHT
1. Touch the sensor button to turn ON the light. The default LED color temperature is 3000K CCT soft white.
2. Touch the sensor button to switch to 5000K CCT daylight.
3. Touch the sensor to turn OFF the light.
The mirrors have a memory feature when they are wired to a wall switch. When you set your desired color temperature and turn
off the mirror at the wall switch, it will save your last setting. When you turn the light back on at the wall switch, it will return to the
last color setting and brightness setting.
OPERATING THE BLUETOOTH
SPEAKERS
®
Press and hold the Bluetooth
touch button for 4 seconds. A chime will indicate that Bluetooth
is activated and the touch button
®
®
will change color to white.
To pair your device for the first time, turn on the device's Bluetooth signal and look for the mirror, which will be labeled
HW MIRROR, and connect to it.
Once paired, play music or make calls from your device and the audio will play through the mirror's dual speakers. To answer
an incoming call when Bluetooth
speakers are on and paired, touch the button with the Bluetooth
icon sensor on the the
®
®
mirror and start talking, the call will come through the mirror. If you want to talk from your phone only, answer the incoming call
on your phone instead.
Speakers can be muted during play by tapping the Bluetooth touch button and can be unmuted by tapping the button again.
CARE AND CLEANING
Clean periodically with a soft cloth and glass cleaner. Avoid spraying glass cleaner directly onto mirror. Avoid abrasive cleaners
and harsh chemicals as they may damage the surface of the product.
6
Homewerks.com
Publicidad
