Descargar Imprimir esta página

Cleaning And Care; Troubleshooting - Klarstein 10003464 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Cleaning
Unplug the Wine Chiller, and remove all items including shelves. Wash the inside surfaces with a warm water
and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash
the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning area
of the controls, or any electrical parts. Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
NOTE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
Moving Your Wine Chiller
• Remove all bottles.
• Securely tape down all loose items (shelves) inside your appliance and tape the door shut.
• Protect outside of appliance with a blanket, or similar item.
Energy Saving Tips
The Appliance should be located in the cool est area of the room, away from heat producing appliances. and
out of the direct sunlight. One characteristic of superconductor units is the length of time it requires to recover
from having the door opened and shut frequently. lt may be necessary to wait longer for the temperature to
return t o its former level once the door has been opened for too long. This is normal for this type of unit.
Problem
Wine Chiller does not operate
or cool.
Wine Chiller is not cold
enough.
Control panel is locked.

Cleaning and Care

Troubleshooting

Possible Cause
Not plugged in.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened loo often.
The door is not closed completely.
The door gasket does not seal properly.
The Wine Chiller does not have the correct clearances.
Abnormal voltage.
Push the arrow buttons simultaniously for 3 seconds.
10

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

10003480