Atlantis BXLAMP03N Manual Del Usuario

NECKLAMP
NECK LED READING LAMP
Technical information
Input voltage: DC5V/1A
Material: ABS & silicone
Battery capacity: 1000mAh
Power: 0,4W
LED quantity: 4 pcs
CCT: 1800k (warm light) 11000k (cold light)
Lifespan: 50.000 hours
Light intensity: 3 levels
Brightness: 60 lx
Switch: Button
In the box
1 neck LED lamp
1 USB cord
1 User manual
HOW TO CHARGE
A USB cable is included in this package to charge the neck LED reading lamp. It can be
used with power banks, PCs, laptops or wall chargers.
Once the USB cable has been introduced in the charging port, the indicator light will turn
red. This light will remain red during charge and it will turn green once the lamp is fully
charged.
Once the lamp has been fully charged, it can work up to 20 h when using warm light mode,
12 h when using cold light mode, and 6 h when using the mixed light mode.
HOW TO USE
1. To turn on the lights, short press the ON/OFF button placed on both edges of the lamp
(right and left). In case you want to turn only one light on, short press the ON/OFF button
on one of the edges (right or left).
2. To change the lighting mode (mixed, warm, cold), short press the ON/OFF button on
both edges of the lamp (right and left) once, twice and three times respectively. In case
you want di erent lighting modes on each edge, short press the ON/OFF button on each
edge until you find the combination that fits you best.
3. To turn o the lights, short press the ON/OFF button placed on both edges of the lamp
(right and left) four times. In case you want to turn only one light o , short press the
ON/OFF button on one of the edges (right or left) four times
Maintenance recommendations
• It is recommended not to use QC 2.0 or 3.0 quick charging, as it may damage the battery.
• Please, charge the lamp fully before first use.
• Please, think about charging the lamp once the light gets dimmer.
• Please, charge the lamp at least once a month.
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
z• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.