Publicidad
Idiomas disponibles
Idiomas disponibles
Output Port: Select one OUTPUT (1-4) port or all from the drop-down menu
to control.
Note: When Output port is set to "all", the Auto CEC and Delay Time (min)
settings are disabled.
Manual (ON/OFF): Click "ON/OFF" button to power on/off the CEC-
enabled display immediately.
Auto CEC: Click "ON/OFF" button to set Auto CEC control enable/disable.
The default setting is "ON".
Delay Time (min): Click the up/down arrow to set the time for the display to
power off automatically when no signal is present. Then click "Apply" to
take effect. For example, if Auto control is set as on and the time is set to 2
minutes, click "Apply", the output display will power off automatically when
there's no signal at the display for 2 minutes.
(5) Audio Mute
This section allows you to set Audio output (1-4) mute/unmute or set all audio
outputs (1-4) to mute/unmute. The default setting is unmute.
All: When set the button to the position of "ON/OFF", all audio outputs are set
to mute/unmute.
Note: The S/PDIF OUT 1-4 is following the audio output of HDMI OUT.
(6) HDCP
HDCP Support allows you to enable or disable HDCP compatibility of each input.
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
15
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Publicidad
