Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 9
3
E
E
E
E
1. Slide lower back board (10) into grooves on left side panel (4), right side panel (5) and middle
board (2).
2. Insert 8 wood dowels (C) into wood dowel holes on bottom board (3).
3. Attach bottom board (3) to left side panel (4), right side panel (5), divider boards (7) and lower
back board (10) by inserting wood dowels (C) into wood dowel holes on left side panel (4),
right side panel (5) and divider boards (7). Make sure lower back board (10) slides into
groove on bottom board (3).
4. Insert 8 screws (E) through holes on bottom board (3) then tighten to left side panel (4), right
side panel (5) and divider boards (7).
STEP 10
1. Attach top board (1) to pre-assembled unit by inserting cam bolts (A, D) into cam lock holes on
left side panel (4) and upper slant board (6).
2. Insert 4 cam locks (B) into cam lock holes on left side panel (4) and upper slant board (6), then
rotate clockwise to secure cam bolts (A, D) in place.
C
C
C
E
E
E
E
B B
B B
4
10
C
C
C
C
C
1
6
4
Publicidad
