Troubleshooting - Cub Cadet CC1-PH Manual Del Operador

PROBLEM
THE BATTERY WILL NOT CHARGE
The battery charger is not plugged in
The battery charger is not firmly assembled
The battery is not fully inserted into the battery charger
The battery is too hot
The battery and/or battery charger are no longer functional
THE BATTERY DIES QUICKLY
The battery is not fully charged
The battery and/or battery charger are no longer functional
THE MOTOR WILL NOT RUN
The battery lacks sufficient charge
The battery is not installed correctly
The lock-off button was not engaged

TROUBLESHOOTING

SOLUTION
Plug the battery charger into a 120V 60hz AC source
Disconnect and then reassemble the battery charger. Refer to
Assembling the Battery Charger.
Remove and then reinsert the battery into the battery charger
completely
Allow the battery to cool for 30 minutes before charging
Refer to the Warranty section for replacement information
Charge the battery completely
Refer to the Warranty section for replacement information
Charge the battery completely
Remove and reinstall the battery
Press and hold the lock-off button before squeezing the throttle
control
13