MIRKA PBS 10NV Instrucciones De Manejo página 48

en (original)
Figure 1
Maintenance
Always disconnect the air supply before maintenance!
Only use original Mirka spare parts!
Replacing the belt PBS 10
1. Disconnect the air supply.
2. Push the tension arm towards the steel protect cover to release the lock function. See Figure 2.
3. Open the steel protect cover by loosening the cover knob.
4. Change the belt, make sure that the belt is centered
5. Close the steel protect cover by tightening the cover knob
6. Press the lock function on the tension arm towards the steel cover to engage tension. See Figure 3.
Example
Figure 2 (Step 2)
Replacing the belt PBS 13
1. Disconnect the air supply.
2. Push the plate to open the protect cover.
3. Keep the plate compressed in order to change the belt, make sure that the belt is centered.
4. Release the push plate to engage tension.
5. Close the steel protect cover.
48
Mirka® PBS 10NV & 13NV
Filter
Regulator
Lubricator
Air hose to your power tool
Figure 3 (Step 6)