Subwoofer Output (Sub.W); Subwoofer Setting Adjustment (80Hz) - Pioneer FH-P6600R Manual De Operación

Using the Digital Signal Processor (DSP)

Subwoofer Output (SUB.W)

This product is equipped with a Subwoofer output which can be switched ON or OFF.
Initially, Subwoofer output is ON.
1. Press the DSP button and select the Subwoofer ON/OFF mode (SUB.W)
in the DSP Menu 2.
2. Switch the Subwoofer output
ON/OFF with the 5/∞
buttons.
3. Change the phase of Subwoofer
output with the 2/3 buttons.
Note:
• You cannot select the SUB.W mode if the preout setting is switched to Rear output mode in the
Initial Setting Menu. (Refer to page 57.)
• Select the OFF setting when you do not want the Subwoofer to operate.
• When the Subwoofer output is ON, the "

Subwoofer Setting Adjustment (80Hz)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.
1. Press the DSP button and select the Subwoofer setting mode (80Hz) in the
DSP Menu 2.
2. Select the frequency to 50 Hz,
80 Hz or 125 Hz with the 2/3
buttons.
3. Increase or decrease the output
level with the 5/∞ buttons.
The display shows "+6" – "–6".
Note:
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
53
All manuals and user guides at all-guides.com
" indicator lights.