Publicidad
Idiomas disponibles
Idiomas disponibles
1
No.
Name
1
DC 18V
2
HDBT OUT
3
IR IN
4
IR OUT
5
RS232
6
HDMI IN
7
ETHERNET
8
MODE
Receiver
No.
Name
POWER
1
LED
2
STATUS
LED
3
LINK LED
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
Rear Panel
2
3
4
Description
Connect to the power adapter provided.
With bi-directional PoC supported, one power
adapter is needed to be connected to transmitter or
receiver to power both units.
Connect to the HDBT IN port of the receiver.
Connect to the IR receiver.
Connect to the IR emitter.
Connect to a RS232 device for pass-through or
connect to a PC for firmware upgrading.
Connect to an HDMI source.
Connect to a network access point or a network
terminal device.
NORMAL: For RS232 pass-through.
UPDATE: For firmware upgrade.
Front Panel
1
2
3
4
Description
ON: The receiver is powered on.
OFF: The receiver is powered off.
FLASHING SLOWLY: The Receiver is working properly.
OFF: The Receiver is not working properly.
ON: Transmitter and Receiver are linked.
BLINKING: Connection exception.
OFF: No link.
5
6
5
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
7
8
Publicidad
