No.
Name
HDCP
4
LED
1
No.
Name
1
DC 18V
2
HDBT IN
3
IR IN
4
IR OUT
5
RS232
6
HDMI OUT
7
ETHERNET
8
MODE
Specification
Technical
Input/Output Port
Video Signal Type
Input/Output Resolution
Support
Audio Format
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
Description
ON: HDCP video is being transmitted.
BLINKING: Non-HDCP video is being transmitted.
OFF: No HDMI signal.
Rear Panel
2
3
4
Description
Connect to the power adapter provided.
With bi-directional PoC supported, one power
adapter is needed to be connected to transmitter or
receiver to power both units.
Connect to the HDBT OUT port of the transmitter.
Connect to the IR receiver.
Connect to the IR emitter.
Connect to a RS232 device for pass-through or
connect to a PC for firmware upgrading.
Connect to an HDMI display.
Connect to a network access point or a network
terminal device.
NORMAL: For RS232 pass-through.
UPDATE: For firmware upgrade.
Transmitter: 1 x HDMI IN, 1 x HDBT OUT, 1 x IR IN,
1 x IR OUT, 1 x RS232, 1 x ETHERNET, 1 x DC 18V IN
Receiver: 1 x HDMI OUT, 1 x HDBT IN, 1 x IR IN,
1 x IR OUT, 1 x RS232, 1 x ETHERNET, 1 x DC 18V IN
HDMI 1.4 with 4K@60Hz 4:2:0 8bit, HDCP 2.2
4K@60 4:2:0 8bit
/1080P/1080i/720P/576P/480P/576i/480i
Supports multichannel audio up to PCM 7.1, Dolby True
5
6
6
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
7
8