Publicidad
Idiomas disponibles
Idiomas disponibles
System Code Switch
The IR Remote provided with the Matrix is shipped in "00" IR system code. In
the event that Remote's IR signal interferes with IR devices, e.g. TV, DVD player,
the Remote can be switched to "4E" code by short pressing the System Code
Switch on the Remote panel. At the same time, you must redefine the IR system
code of the Matrix using the API command.
RS232 Control
Advanced users may need to control the matrix through RS232 serial
communication. Connect a control PC or control system to the RS232 port of
the switcher. API command for RS232 control is available in the separate
document "API Command Set_0E-HDMIMX2". A professional RS232 serial
interface software (e.g. Serial Assist) may be needed as well.
Before executing the API command through RS232 serial connection, please
ensure RS232 interface of the device and the control PC are configured correctly.
Parameters
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
Value
115200 bps
8 bits
None
1 bit
None
9
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Publicidad
