Wi-Fi Networks - Devolo WiFi 6Repeater 3000 Manual

However, the data transmission from the repeater
to the respective terminal device and vice versa
takes place over the repeater network.
Home & repeater network settings
In this section, you specify the desired frequency
band mode. The WiFi 6 Repeater 3000 supports
both the parallel operation of the Wi-Fi frequency
bands and their separate use.
If you enable the option Use common settings for
the 2.4 GHz and 5 GHz band, the settings of re-
peater mode apply to both frequency bands.
If the option is disabled, each frequency band will
be configured differently.
Network name
In the Network name field, select the name of the
Wi-Fi network.
Password
In the Password field, enter the key for the select-
ed Wi-Fi network.

4.5.3Wi-Fi networks

You can make all necessary changes to your Wi-Fi
network here.
Network configuration 36
Wi-Fi network mode
The WiFi 6 Repeater 3000 supports both the
parallel operation of the Wi-Fi frequency bands
and their separate use.
devolo WiFi 6 Repeater 3000