Publicidad
Idiomas disponibles
Idiomas disponibles
ORDERING REPLACEMENT PARTS
IF YOU NEED ANY REPLACEMENTS PARTS
Battery Cartridge
Battery Charger
Base
Charger Power
Adaptor
Strainer
Please visit
carrying our replacement parts and have the part
number ready when ordering.
5
Part # R-2001
Part # R-2002
Part # R-2004
Part # R-2005
for a list of stores
TROUBLE SHOOTING & SAFETY
PUMP IS NOT PUMPING
- Check to make sure the on/off knob is turned furthest to
the right.
- Verify battery is charged by placing battery in charger
and making sure light is green.
- Check the hose for any kinks.
- Check pump strainer for debris.
See strainer removal instructions on page 3.
- Verify the pump is in at least ¾" of water. If the pump is
in less than ¾" of water, the pump may not be able to
pick up the water.
BATTERY NOT CHARGING
- Check power connection on wall.
- Check to make sure the power cord is fully inserted into
the back of the charger.
- Make sure the battery cartridge is fully seated in the
charger base in the correct orientation and the charge
light is on.
- Verify charger is in good working condition.
- Depending on the age, usage rate and the environment
where the battery cartridge has been stored, the battery
may need to be replaced.
SAFETY PRECAUTIONS
- Do not place wet battery cartridge in charging base.
- The pump is NOT designed for drinking water.
- Ensure battery and pump are dry before inserting
cartridge into pump.
- THIS PUMP IS FOR WATER ONLY
DO NOT PUMP FLAMMABLE LIQUIDS
DO NOT PUMP CORROSIVE LIQUIDS
DO NOT PUMP GASOLINE/DIESEL/PETROL
- Do not insert battery into the pump or insert the battery
into the charger where flammable vapors are present.
A small spark may occur and ignite any surrounding
flammable liquid, possibly damaging the surrounding
environment and presenting a health risk.
6
Publicidad
