Joie i-Juva Manual De Instrucciones página 10

4. Level line on infant carrier module
must be level to the ground when
the infant carrier module is
installed.
33
!
Tension the vehicle safety belt as
much as possible, checking that
it is not loose or twisted.
!
After installing the infant carrier
module, always check that
the vehicle belts are routed
correctly and securely fastened
into the vehicle buckle.
34
17
33
34
Use with Strollers
see images -
35 40
Your infant carrier module is designed to attach to certain Joie stroller
models featuring a special tray, armbar or calf support.
!
Please make sure your stroller can fit the infant carrier module before
purchasing it.
!
Never allow more than one baby in the travel system at one time.
!
Please brake your stroller before assembling the infant carrier
module.
!
Check that the parts used to fix the infant carrier module are
securely fastened on the stroller.
!
Recline the stroller seat back to the lowest position.
Use with Joie Strollers
To assemble the infant carrier module on Joie strollers, please follow
these steps:
1. Place infant carrier module into stroller so notches in rockers fit over
edge of armbar, tray or calf support. The infant carrier module will
then automatically click into place.
!
If armbar has fabric cover, please detach the Velcro on armbar
1
cover first. -
37
!
For the stroller with a special calf support, please adjust the calf
support to the vertical position, detach the Velcro, and then lift the
1
fabric cover. -
38
& & &
35 36 37 38
18