Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
CAUTION: Risk of scalding. KALLISTA low-flow showerheads are designed for use with compatible
KALLISTA valves. When installing a low-flow product to an existing showering system, verify compatibility
before showering. Do not use this KALLISTA low-flow product with a shower valve that allows the water
temperature to become too hot when other plumbing products are used.
Prior to using your shower, verify your new showerhead is compatible with your shower valve (located behind
the wall):
● While standing outside the shower, turn on the shower valve. Do not step into the shower.
● Adjust the water to your typical showering temperature.
● Have someone flush the nearest toilet.
● With your hand, carefully check the water temperature from the showerhead while the toilet is refilling.
● If the water becomes significantly more hot, you will need to replace the shower valve with a compatible
KALLISTA valve or return your showerhead.
NOTICE: For a showerhead rated 2.0 gal/min (7.6 L/min) maximum, use with an automatic compensating valve
rated 1.6 gal/min (6.1 L/min) or less.
‰ Observe all local plumbing and building codes.
‰ Shut off the main water supply.
‰ KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
1491218-2-A
2 of 7
THANK YOU FOR CHOOSING KALLISTA
BEFORE YOU BEGIN
TOOLS AND MATERIALS
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Showerhead
Publicidad
