ASROCK H610M-HDV/M.2 R2.0 Manual página 25

Serial ATA3 Connectors
Right Angle:
(SATA3_2:
see p.1, 2, No. 8) (Upper)
(SATA3_3:
see p.1, 2, No. 8) (Lower)
Vertical:
(SATA3_0:
see p.1, 2, No. 11)
(SATA3_1:
see p.1, 2, No. 10)
USB 2.0 Header
(9-pin USB_5_6)
(see p.1, 2, No. 7)
USB 3.2 Gen1 Header
(19-pin USB3_3_4)
(see p.1, 2, No. 6)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, 2, No. 15)
SATA3_1
SATA3_0
DUMMY
GND GND
+A
+B
-A
-B
USB_PWR USB_PWR
1
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
IntA_PB_SSTX-
GND
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
H610M-HDV/M.2 R2.0
H610M-HVS/M.2 R2.0
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to 6.0
Gb/s data transfer rate.
There is one header on this
motherboard. This USB
2.0 header can support two
ports.
There is one header on this
motherboard. This USB 3.2
Gen1 header can support
two ports.
This header is for connecting
audio devices to the front
audio panel.
21