Infrared Remote Control - DeLonghi 279798 Manual De Instrucciones

4.1 OPERATION
All functions of the appliance are controlled by an infrared
remote control.
GB
function), the radiator can be turned on and off using the
"Standby" button on the side control panel (Fig. 9, Section
4.2 OPERATION WITH REMOTE CONTROL UNIT
The appliance is controlled by an infrared remote control
with LCD display.
4.2.1 LED AND BUZZER
The control LEDS allow you to immediately recognize the
active mode (Fig. 9).
Fig. 9
STANDBY key
UPPER LED
Green
Red
Blue
Yellow
White
Flashing green
Flashing red
Yellow and red alternating Malfunctioning
Pulse green
LEDS
Standby
Pilot Wire
Comfort
Night/Eco
Chrono
Anti-Freeze
Overdrive (2h)
No power supply
LOWER LED
Red The heating element is on.
Off The heating element is off.
-
Blinking red Transmission of the signal from the
(2 seconds) remote control.
Flashing red An open window has been detected.
The control box is equipped with a buzzer that signals the

4.2.2 INFRARED REMOTE CONTROL

The remote control communicates with the appliance by
The distance between the remote control and the receiver
must not be more than 5 m.
Fig. 10
The remote control communicates with the appliance
also when placed in the dedicated slot on the right side
of the radiator.
When the appliance receives commands from the remote
Always handle the remote control with great
care and keep it in the slot on the appli-
ance (Fig. 11). If the batteries are inserted, a
magnet placed behind the slot will keep the
remote control in place. It is recommended
not to put within the slot objects sensitive to
As an alternative, the remote control can be placed in
the wall-mount support included in the packaging.
16
5 m MAX
Fig. 11