Before Each Use - M7 DG501 Manual De Instrucciones

WARNING:
!
Detach the battery from the grinder before
cleaning or performing any maintenance.
WARNING:
!
Always wear safety goggles or safety
glasses with side shields during power tool
operations, or when blowing dust. If operation
is dusty, also wear a dust mask.
WARNING:
!
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating
oils, etc. come in contact with plastic parts.
Chemicals can damage, weaken or destroy
plastic, which may result in serious personal
injury.
WARNING:
!
All maintenance should only be carried out by
a qualified service technician.
CARE OF THE GRINDING AND
CUTTING WHEELS
Grinding and cutting wheels should be stored
in an organized way so that wheels can be
removed without disturbing or damaging
other wheels.
MAINTENANCE
1. Inspect the angle grinder, the paddle switch
2. Check for damaged, missing, or worn
3. Check for loose screws, misalignment
4. If abnormal vibration or noise occurs,
Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools using
compressed air. Never use detergent or
alcohol.

BEFORE EACH USE:

and the accessories for damage.
parts.
or binding of moving parts, or any other
condition that may affect the operation.
turn the tool off immediately and have the
problem corrected before further use.
CLEANING
17