English - IKEA SJOMARKE Serie Manual De Instrucciones

English

Charger features
• Wirelessly charges Qi-certified devices.
• Certified according to specification Qi 1.2.4BPP.
• Temperature and power monitor for safety.
• LED status indicator.
Instructions for use
• Connect the charger cable to the power adapter
and plug it into the wall socket.
• For wireless charging, place the device to be
charged on top of the plus sign (+) on the desk.
The device must be placed directly over the plus
sign (+) on the desk for the charging function to
work optimally. Note that on some devices you
may have to activate wireless charging in settings.
• If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that the battery
has begun charging when the battery symbol
appears on your device.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
4. Error: LED flashes.
Good to know
• The distance between device and charger should
be minimum 8 mm and maximum 22 mm, or the
charger will not start charging.
• Charging function works through every material
except metal.
• The distance between the charger and any metal
object (such as a table frame) must be at least 30
mm, otherwise charging will not start and the LED
will start flashing to indicate an error.
• Mobile phone cases containing metal or magnetic
components will interfere with the charging
function and must therefore be removed before
charging.
• Devices may get warm during charging; this is
completely normal and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device's
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
• Charger storage temperature: -20°C to 25°C.
• Charger operating temperature: 0°C to 40°C.
• Unplug the charger from the power source before
cleaning and when it is not in use.
• To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.
Recommended precautionary measures and
technical data: See the back of the charger.
Save these instructions for future use.
WARNING:
• Only charge devices that are Qi-certified.
• The wall socket must be located near the
equipment and must be easily accessible.
• Only use in dry locations.
• Only use the included 24V adapter with the
wireless charger unit. Other adapters could cause
damage to the unit.
• Children should be supervised to ensure they do
not play with the product.
• Do not subject the units to wet, moist or
excessively dusty environments since this can
cause damage to the units.
• If the cord is damaged the product shall be
destroyed.
• Do not install the product on a desk higher than
1.5m.
18