Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY & INSTALLATION
WARNING: If any part is damaged or missing, do not assemble this product until the part is replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not recommended. Any such alteration
or modification is misuse and could result in a hazardous condition leading to serious personal injury.
WARNING: Before assembly or installation, place the Zero Turn Mower on a firm and level surface and set the
parking brake. Stop the motors and remove the safety key to prevent unintended starting.
UNPACKING
◾
This product requires assembly and installation on the EGO POWER+ ZT5200L/ZT5200L-FC zero turn mower.
◾
Carefully remove all items from the box. Make sure that all items listed in the packing list are included.
◾
Inspect the product carefully to make sure that no breakage or damage occurred during shipping.
◾
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
◾
If any part is damaged or missing, please return the product to the place of purchase.
TO REMOVE THE MOWER DECK
1. Park the mower on a level surface and set the parking brake.
2. Stop the motors and remove the safety key. Allow the cutting blades to come to a complete stop.
3. Adjust the deck-height-adjustment lever to the lowest cutting height position.
4. Disconnect three blade motor cables (Fig.1a).
5. Place a rug or a mat (similar in size to that of the deck) under the deck to prevent the damage to the deck.
6. Remove the cotter pins and push the shaft pins out. Save both sets for deck re-assembly (Fig. 1a & b & c).
7. Push the deck forward (towards the front wheels) and rotate the suspension linkage counterclockwise to release it
from the deck hooks (Fig. 1a).
4
MULCHING KIT — ABP5200
Publicidad
