Names And Functions Of Remote Controller - Hitachi SPX-WKT2 Manual De Instrucciones

2. NAMES AND FUNCTIONS OF REMOTE CONTROLLER

The figure below shows all the indications for reference. The actual display during operation is different.
Display part
Room Temperature Indicator
(Around Remote Controller)
Operation Mode Indicator
Eco Mode and Forced Cooling
setting, and External device
operation indicator
Operation Guide Indicator
Operation Indicator Lamp
Lit in normal operation and
flashes during fault conditions.
START/STOP Button
(Operation indicator lamp)
Press this button to start operation.
Press it again to stop operation.
Operation part
CAUTION
• If this remote controller is connected to the indoor unit, you can not set the timer operation at the wireless remote controller.
NOTE
• Do NOT press the buttons hard or press with sharply pointed material such as a ball point pen.
The operation part of the remote controller may be damaged.
• Make sure that the buttons are pressed softly with fingers.
Fan Speed Indicator
Cross Button
 : Up button
 : Down button
 : Left button
 : Right button
- 4 -
Auto Swing Indicator
Enter Button
Eco Auto Off Indicator
It is indicated when the eco
auto off function is set.
Sleep Timer Indicator
It is indicated when the sleep
timer is set.
Timer Indicator
It is indicated when the timer
function is set.
Operation Lock Indicator
It is indicated when the
operation lock function is set.
Filter Sign Indicator
It is indicated at the set period
for filter cleaning.
Setting Temperature Indicator
Menu Button
To display Menu.
Eco Button
By pressing this button during
operation, the unit performs
the eco operation.
Return/Help Button
To return to the previous
screen. When pressed at the
normal mode screen, will
display Help Menu.