Publicidad
Idiomas disponibles
Idiomas disponibles
Read and Save These Safety Precautions
ectricity at main switch before wiring or servicing fan in order to avoid
ctrical shock.
must be in accordance with the National Electric Code (ANSI/NFPA 70-
ocal electrical codes. Electrical installation should be performed by a qualified
ctrician.
ng the wire connections, the wires should be spread apart with the grounded
and the equipment-grounding conductor on the one side of the outlet box
grounded conductor on the other side of the outlet box.
after being made should be turned upward and pushed carefully up into
box.
of a fan identified as grounded conductor to be connected to grounded
of power supply, conductor of a fan identified as ungrounded conductor to
ed to an ungrounded conductor of power supply, conductor of fan identified
ent grounding to be connected to an equipment-grounding conductor.
not be mounted in an area where it might get wet.
he risk of fire, electric shock or personal injury, mount to outlet box marked
e for Fan Support" and use mounting screws provide with the outlet box.
nd best operating results, we recommend that you have a qualified electrician
nd install your fan.
G: To reduce the risk of fire or electric shock, do not use this fan with any
speed control device.
the risk of personal injury, do not bend the blade brackets when installing
s, balancing the blades or cleaning the fan. Do not insert foreign objects
rotating fan blades.
Before Assembly
that the fan voltage (120) is compatible with your own electrical system.
make sure that your carton contains all the parts mentioned in the parts list.
the motor is taken out of carton, please put it in a soft cloth to prevent any
ornamental surface.
fore installing, choose a location for mounting the fan where the blades have
f clearance from all objects and floor. Mount an outlet box to the ceiling or
box.
o not mount fan to sheet rock or drywall type materials. To insure proper
e two #1 wood screws to secure mounting bracket to joist or beam. If the
oose does not have a suitable support beam, install a 2"X4" brace between
support.
Tools You Need
Screwdriver
2. Adjustable Wrench
All manuals and user guides at all-guides.com
3. Needle Nose Pliers
What You Have
Parts
Quantity
1. Mounting Plate
2. Fan Motor/
3. Blade Holders
4. Switch Housing Assembly
5. Blades (sold separately)
6. Balance kit
3
Screw Package
Quantity
S1. Wood Screws & Washers
S2. Screws & Washer for
Mounting Plate
S3. Outer Housing Screws
S4. Blade Screws
S5. Wire Connectors
S6. Motor Screws
S7. Pull Chains
S8. Switch Housing Screws
S9. "J" Hook
S10. Zip Tie
1
1
1
5
2
1
5
1
4
5
S1
2
S2
2
4
S3
S9
16
3
S4
11
1
3
S5
1
1
S6
S7
S8
S10
®
Publicidad
