Technical Data; Eu Declaration Of Conformity - Fuji FOR-50ANV-E Manual Del Operador

Technical Data

FOR- FOR-
50ANV-E 50ANV-M
Free speed 12000 12000
(rpm)
Weight (kg) 1.6 1.6
Weight (lb) 0.71 0.71
Noise and vibration
FOR- FOR-
50ANV-E 50ANV-M
Sound pres- 79 79
sure level
(dB(A))
Vibration 0.76 0.76
uncertainty
Vibration
2.71 2.71
(m/ s²)
Uncertainty 3 dB(A), in accordance with EN ISO 15744. For
Sound power level, add 11 dB(A)
Vibration standard : ISO-28927-3
These declared values were obtained by laboratory type testing
in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared values
are not adequate for use in risk assessments and values
measured in individual work places may be higher. The actual
exposure values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, Fuji Industrial Technique Co., Ltd., cannot be held liable
for the consequences of using the declared values, instead of
values reflecting the actual exposure, in an individual risk assess-
ment in a work place situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing handarm
vibration can be found by accessing
index.php and selecting 'Tools' then 'Legislation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration exposure,
so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the ma-
chinebuilder.
Noise and vibration emission data for the complete
machine should be given in the instruction manual
for the machine.
FOR- FOR-
50ACV-E 50ACV-M
12000 12000
1.7 1.7
0.76 0.76
FOR- FOR-
50ACV-E 50ACV-M
75.5 75.5
0.77 0.77
2.77 2.77
http://www.pneurop.eu/
© Fuji- 9502001215
Declarations

EU DECLARATION OF CONFORMITY

We, Fuji Industrial Technique Co., Ltd., 2-1-14, Kamiji,
Higashinari Ku, Osaka, Japan, 537-0003, declare under our sole
responsibility that the product (with name, type and serial
number, see front page) is in conformity with the following
Directive(s):
2006/42/EC (17/05/2006)
Harmonized standards applied:
EN ISO 11148-8 : 2011
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
Statement of use
This product is designed for removing or polishing material
using coated abrasives or polishing attachments. No other
use permitted. For professional use only.
Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two (2)
drops per minute.
Maintenance instructions
• Follow local country environmental regulations for safe
handling and disposal of all components.
• Maintenance and repair work must be carried out by
qualified personnel using only original spare parts. Contact
the manufacturer or your nearest authorised dealer for
advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from
energy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if
the tool is used every day. Replace damaged or worn parts.
Disposal
• The disposal of this equipment must follow the legislation
of the respective country.
• All damaged, badly worn or improperly functioning devic
es MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.
Random Orbital Sander
5