physa PHY-750HD-03 BLACK Manual De Instrucciones página 21

3. Turn the power switch ON. Operate the timer dial to set the desired
running time of the appliance. The water begins to heat. Approximately 5-
8 minutes later, the steamer begins to steam (the heating time before
steaming depends on the water volume in the tank).
NOTE! When the appliance detects the water level is below the minimum,
it will turn off automatically! Before restarting the appliance, turn the power
switch OFF, refilling the tank with demineralised water. Turn the power switch
ON. The appliance begins to generate steam once it has heated water to the
correct temperature.
4. Frequently check the waste water tank level. When the waste water tank
is full, remove, empty it of waste water and reinstall in the appliance.
5. If the appliance will not be used for a long time, empty both tanks.