Publicidad
Idiomas disponibles
Idiomas disponibles
Wifi intallation
•
Before connecting the camera to the power supply,
turn the rotary head by hand to reveal the cover
covering the memory card slot and the reset button.
This cover is located on the top of the camera lens, if
you want to insert a memory card to store recordings,
do it now.
•
Connect the camera to the power supply and wait a few
seconds for the camera to perform its startup test.
•
Press reset for 5 seconds, until you hear a beep, to
reset the camera in connection mode. The camera will
test again and a short melody will be heard, then it will
beep every 15 seconds.
•
Connect your phone to the 2.4g network and open the
app "Energeeks 3.0".
•
Press the + sign at the top to add a new device and
select surveillance camera.
•
Enter the password for your 2.4g wifi network and
press confirm.
•
Show the camera the QR code that appears on the
screen, placing the screen a few cm from the lens and
slowly moving it away to a distance of about 15 cm.
If the QR code is not recognized, continue showing
it by slowly zooming in and out of the camera until
you hear confirmation beep, then in the app tap "ear
confirmation sound" to finish installing the camera.
26
Publicidad
