Energeeks EG-CIPEXT001 Guía De Instalación Rápida página 27

• The installation will finish automatically and the camera
will be displayed.
Note: If desired, after installation is complete, you can
reconnect your mobile phone to the 5g network.
Connection failure
If after reading the QR code the installation process fails,
make sure you are connected to a 2.4 GHz Wifi network
and that the provided password is correct. If you do not
have a 2.4 GHz signal in your Wifi network, contact your
internet service provider.
Direct cable connection
To improve the internet signal and avoid connection
failures, it is recommended to connect the camera by
direct cable, very useful in places where Wi-Fi coverage
is limited.
To install the camera, stand near the router, where it has
good coverage, and install the camera via Wi-Fi. Once
connected you can take it to the area where you want to
install it and just plug in the cable, the camera will start
working directly, no need to link again.
27