Petsafe Classic In-Ground Fence Manual De Instrucciones página 26

The transmitter will not
turn on.
The transmitter is on and
the wire break warning
alarm is sounding.
26 26
• Make sure the transmitter is connected to the power adaptor.
• Check that the power adaptor is plugged in properly.
• If the system is plugged into an RCD or GFCI outlet, check to see if the circuit has been tripped. Reset
the RCD or GFCI circuit if required.
• Verify that the outlet is working properly by plugging in a known working item such as a lamp.
• Try plugging the fence transmitter into another standard mains power outlet.
• If the transmitter still does not come on, the transmitter and/or power adaptor needs to be replaced.
Contact our Customer Care team.
• Check the boundary wire connections at the fence transmitter for proper connection.
• Check for broken or damaged boundary wires at the outside entry to the house.
• Perform the System test to determine if the fence transmitter needs to be replaced.
• If the fence transmitter is functioning properly, you have a break in your boundary wire; see
Wire break location test.