Troubleshooting; What`s In The Box; Safety Instructions; Fcc Statement - Southwire Elite 1100 Serie Instrucciones De Funcionamiento Y Mantenimiento

TROUBLESHOOTING

Please note the following:
1. When an output is not in use, please ensure that the port is turned off. Example
press the AC button to turn off the output, the icon will no long show on the LCD
display.
2. Please ensure the power consumption is less than 1000W, before plugging into
the unit. If the output exceeds 1000W, the Elite 1100 will beep twice and a
warning icon will flash on the LCD display, disconnect device to rest.
STORAGE AND MAINTENANCE
Before use or storage, plug your Southwire Elite 1100 Series into the wall outlet
until it is fully charged. Store your charged portable power station in a cool dry
location until ready for use.
If the display shows less than 20% capacity, plug the unit into a power source,
such as an AC outlet or a solar panel, as soon as possible to recharge.
Having your power station connected to a power source, between adventures or
while in storage keeps its battery healthy and topped off. This prolongs battery life
and will ensure your power station is charged and ready to go all day, every day.
If you can't keep your power station plugged into a power source during storage,
fully-charge your power station every 3 months and store it in a cool, dry place.
Failure to maintain your power station by following these steps can result in battery
damage which will void the product warranty.
TROUBLESHOOTING
If your devices are not recharging from your Elite 1100, follow the following steps:
1. Make sure the Output buttons (these are the AC/DC or USB buttons) have been
turned on. Once turned on the output type will light up on the LCD screen.
2. Check the LCD Display to see Battery level, if it is less than 20% or below, plug
your unit in to charge.
3. Check the LCD Display for the following warning icons:
* Overload or Short-circuit : The DC icon will be blinking, and the Warning Alarm
will go off twice.
* Temperature: Low & High Temperature Warning icon will appear
The SW Elite 1100 Series has a temperature rating ranging from 0 - 40°C (32 - 104
°F). This is the ideal working condition anything outside this can lead to the unit not
working at optimal functionality
4. Make sure the power of devices does not exceed more than 1000W, this is the
maximum this station can support. The unit will beep twice with the warning icon
flashing on the LCD display. Unplug the device causing the overload and the
unit will reset.
5. For additional support, please contact us at 1-800-561-4231.
9
WHAT'S IN THE BOX
WHAT'S IN THE BOX
AC
AC Output 120V 60Hz
DC 2.4V 5A
Solar Panel
DC AC
IN/OUT OUT
PD100W PD27W
5V,2.4A QC 3.0
5V,2.4A QC 3.0
DC Output 12V
Southwire 1100 Car Charger Cable AC & AC Cable
(Two Parts)

SAFETY INSTRUCTIONS

CAUTION
Failure to carefully read the following notes may result in leakage, explosion and
burning of batteries.
Do not put the product into a microwave oven or pressure vessel;
Do not combine the battery with once-for-all batteries (such as dry cells) or the
batteries of different capacities, models or varieties of functions;
Do not use the battery if it is in abnormal conditions such as peculiar smell,
heating, deformation, discolouration or other abnormalities;
Please move the product away from the place close to open flame if its battery is
leaking or giving off peculiar smell;
The leakage of electrolyte may cause fire hazards or explosion.
Do not cover the units air vents. The air vents keep the battery cool and working
efficiently. Covering the air vents while in use can cause over heating.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
10
OPERATING and MAINTENANCE
INSTRUCTIONS
Elite 1100 Series Portable Power Station
53253
AC
DC 2.4V 5A AC Output 120V 60Hz
Solar Panel
DC IN/OUT AC OUT
PD100W PD27W
5V,2.4A QC 3.0
5V,2.4A QC 3.0
DC Output 12V
CHARGE FIRST!
Before reading through the manual, you can
begin by charging your Southwire Elite 1100
Series. Just connect it to the power supply cord
provided and plug the unit into a wall socket.
User Manual 8 in 1 Connectors